Introduction This document provides an overview of consequence classification for dams in British Columbia. It outlines a rough method for assessing consequence and some key concepts that require consideration in assessing consequence. If the method provides a clearly defined consequence classification then a consequence classification can be assigned. If the results are uncertain, use of the higher possible consequence classification is appropriate or a more detailed assessment method should be used. For larger structures or complicated downstream channel conditions more detailed procedures may be required These guidelines are only intended for consequence of failure classification. They are not adequate for the preparation of inundation mapping for Emergency Preparedness Planning (EPP), or for the assessment of hazards and risk analysis. Consequence Classification Guide The BC Dam Safety Regulation - Schedule 1 “Downstream Consequence Classification Guide” outl...
Civil Engineers Page, Civil Engineering Softwares, Civil Engineering Notes, Irrigation Engineering, Concrete Technology, ACI Codes for Building Construction, Structural Analysis & Design Engineering Software, PTC Mathcad 15.0, Auto CAD 2012, Orion - Structural concrete building design software, dam breach condition and downstream inundation , Concrete Mix Design Work Sheet, Tile Drainage /Sub Surface Drainage System, Profile Plotter for Irrigation , ETABS 9.7.4 (FULL VERSION), engineering